Hoppe Adjustable Door Hinge - Guide Hinge, Rustic Umber

Hoppe Adjustable Guide Hinge in Rustic Umber

When the gap between your door and the frame runs wider on one side, you close it at the guide hinges, and Hoppe makes this one in rustic umber.

The guide hinge moves the door sideways. With the door open, you turn the 3/16" hex screw on the face of the door leaf: clockwise closes the gap on the hinge side and counterclockwise opens it.

A three-hinge door takes a guide hinge at the top and the bottom, with the set hinge between them. Guide hinges have no hand, so this one fits left and right hand doors, inswing or outswing. Hoppe finishes its hinges the same way as its handles and backplates, so this hinge matches rustic umber Hoppe handle sets.

Notes

• Type: Guide hinge, moves the door sideways
• Adjustment: 1/8" (3mm) each way, 3/16" hex screw on the face of the door leaf
• Hand: Non-handed, fits left and right hand doors, inswing or outswing
• Finish: Rustic Umber
• Material: Aluminum, powder coated, with flush caps
• Size: 4" (101mm) wide open, 3-5/8" (92mm) tall
• Leaf width: 2" (50.5mm) from the center of the pin
• Rout: 3-21/32" (92.8mm) long, 1-5/16" (33.4mm) wide, 5/8" (15.88mm) radius corners, single pass
• Door weight: Up to 330 lb (150 kg)
• Screws: Not included. Each hinge takes eight #10 wood screws: four 1-1/4" in the door leaf, three 3/4" and one 2-1/4" in the frame leaf, the long one into the stud
• Availability: In stock
• Works with: The rustic umber set hinges for left hand inswing / right hand outswing and right hand inswing / left hand outswing doors
• Included: One guide hinge

Not sure which part fits your door? Fill out our identification form or call us and we'll confirm the correct part.